FTTH ABS and PC Fiber Optic Distribution Box / 1*32 Way fiber optic junction box
Distribution box Type outdoor Optical Distribution Boxes is designed to connect feeder/distribution cable to subscriber's drop cable using PLC splitter in FTTx networks. It has 2 input ports and 16 output ports on the bottom and it is easy to install on the wall or pole. The rear tray is for splicing a fiber of feeder cable with PLC splitter and the front tray is for connecting subscriber's drop cable through adaptor plate on the tray.
1) Be made of high impact plastic PC/ABS
2) Can accommodate 1x8 PLC splitter and 1x16 PLC splitter
3) The high strength plastic, anti-ultraviolet radiation and ultraviolet radiation resistant, resistant to rain
4) Up to 16 FTTH drops ,2 inlet ports, 32 outlet ports
5) Wall and pole mountable
6) The design of the two-tier structure, the upper wiring layer optical splitter, lower for fiber splicing layer.
1) Widely used in FTTH access network
2) Telecommunication Networks
3) CATV Networks
4) Data communications Networks
5) Local Area Networks
Main Technical Parameters:
| Fiber Terminal Box Parameter|
|Installation||Wall Mounting or Pole Mounting|
|Protection Grade:||IP 55|
|Application Adapter||SC/APC or SC/UPC|
|Application Cable||Outdoor or indoor|
|MAX Core||32 Core|
|Adapter and Pigtail||With or Without is optional|
|Dimension||342mm x 267mmx 127mm|
|Material||ABS / PC / SMC|
|Dimensions||420mm x 320mm x 130mm (W x H x D)|
|Box door opening angle||≥180°|
|Grounding voltage level||≥3000V(DC)/10mA/1 min|
Q1:How to 100% guarantee the insertion loss of the adapters is below 0.1dB/0.2dB?
Firstly the quality of the sleeve , secondly the accurate size of housing,
then 100% inspection in the production is must.
Q2:Why some times too tight or loose when assemble the adapters to the plate?
There is tolerance of the thickness of the plate especially baking finished plate, you must make sure the gap distance is just match the plate thickness.
Q3:How to keep the clearance of the endface of the connectors?
Do not take off the dust cap in transportation and stocking, make sure not to touch the end face with hand. If found dirty or scratch under telescope, please clean it with alcohol.
Q4:What’s the warranty of Nia Fiber fiber optic patch cord?
We can ensure lifetime warranty as our fiber optic cable is UL approved and all our
fiber optic patch cords are 100% testing passed
Q5: Can we print our logo on the fiber cable jacket?
Yes, of course. You can decide the print on the fiber cable jacket. MOQ is 1KM when
you want to add your logo. No MOQ as neutral printing.
Q6: What is the insertion loss for singlemode?
It is ≤0.2dB (Typical ≤0.1dB)
request. Our 30 test passing rate is over 90%.
Nia Fiber Service:
Niafiber Africa Ltd Fiber optic patch cord, Fiber optic connector, Fiber optic adaptor, Fiber optic PLC splitter,Fast connector, Fiber optic patch panel,Fiber terminal box,Fiber closure and more.
Nia Fiber always foucuses on reliable quality development. By complying with our qulity policy"Continue to pursue excellent quality, offer the best products and serices in order to realize customer needs and satisfaction", all along we strive for providing excellent products and service to meet and exceed our customer's need. Nia Fiber constantly works with modern quality management methods to ensure the whole service procedure is implemented flexibly and efficiently.